Коммутатор Cisco MDS DS-C9148-48P-K9

Cisco MDS 9148 Multilayer Fabric Switch - доступный, универсальный, легко управляемый коммутатор для сетей SAN начального уровня и для сетей отделов предприятий. Коммутатор, выполненный на специализированных ИС для сетей хранения типа «коммутатор на кристалле», обеспечивает выделенную полосу пропускания Fibre Channel 8 Гбит/с на каждом Cisco MDS 9148 поставляется в полной 48-портовой конфигурации.Minimum software requirements● Cisco MDS 9000 NX-OS Software Release 5.0(1) supporting Cisco MDS 9148 and Cisco Fabric Manager● Cisco MDS 9000 NX-OS Release 5.2(1) supporting Cisco DCNM for SAN● Zero-touch installation capability is scheduled for a future release of Cisco MDS 9000 NX-OS SoftwarePerformance and port configuration● Port speed: 8-, 4-, 2-, and 1-Gbps autosensing with 8 Gbps of dedicated bandwidth per port● Buffer credits: Up to 128 for a group of 4 ports, with a default of 32 buffer credits per port and a maximum of 125 buffer credits for a single port in the group● Ports per chassis: Up to 48 8-Gbps ports◦ Base configuration with 16 ports; additional configurations for 32 and 48 ports available◦ Upgrade ports in 8-port increments from any configuration with the port activation license● PortChannel: Up to 16 ports in a PortChannel with automatic load balancingSecurity● VSAN fabric isolation● Intelligent packet inspection @ port level● Hardware zoning by access control lists (ACLs)● Extended broadcast zoning● FC-SP switch-to-switch authentication● FC-SP host-to-switch authentication● RBAC using RADIUS or TACACS+ authentication, authorization, and accounting (AAA) functions● Management access● Secure FTP (SFTP)● Secure Shell Version 2 (SSHv2)● Simple Network Management Protocol Version 3 (SNMPv3) implementing Advanced Encryption Standard (AES)● Control-plane securityVirtual Computing Environment (VCE) coalitionCisco MDS 9148 is supported as a VCE coalition option for Vblock1®, Vblock2®, Vblock™ 300, and Vblock™ 700CompatibilityFibre Channel protocols● FC-PH, Revision 4.3 (ANSI/INCITS 230-1994)● FC-PH, Amendment 1 (ANSI/INCITS 230-1994/AM1 1996)● FC-PH, Amendment 2 (ANSI/INCITS 230-1994/AM2-1999)● FC-PH-2, Revision 7.4 (ANSI/INCITS 297-1997)● FC-PH-3, Revision 9.4 (ANSI/INCITS 303-1998)● FC-PI, Revision 13 (ANSI/INCITS 352-2002)● FC-PI-2, Revision 10 (ANSI/INCITS 404-2006)● FC-PI-3, Revision 2.1 (BSR INCITS 460-200x)● FC-PI-4, Revision 8.0 (INCITS 450-2009)● FC-FS, Revision 1.9 (ANSI/INCITS 373-2003)● FC-FS-2, (BSR INCITS 424-200x)● FC-FS-3, Revision 0.9 (BSR INCITS PN-1861-D-200x)● FC-LS, Revision 1.62 (ANSI/INCITS 433-2007)● FC-AL, Revision 4.5 (ANSI/INCITS 272-1996)● FC-AL-2, Revision 7.0 (ANSI/INCITS 332-1999)● FC-AL-2, Amendment 1 (ANSI/INCITS 332-1999/AM1-2003)● FC-AL-2, Amendment 2 (ANSI/INCITS 332-1999/AM2-2006)● FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001)● FC-SW-3 , Revision 6.6 (ANSI/INCITS 384-2004)● FC-SW-4, Revision 7.5 (ANSI/INCITS 418-2006)● FC-SW-5, (BSR INCITS 461-200x)● FC-GS, (ANSI INCITS 288-1999)● FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001)● FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004)● FC-GS-5, (ANSI INCITS 427-2007)● FC-GS-6, (BSR INCITS 463-200x)● FC-BB, Revision 4.7 (ANSI/INCITS 342-2001)● FC-BB-2, Revision 6.0 (ANSI/INCITS 372-2003)● FC-BB-3, Revision 6.8 (ANSI/INCITS 414-2006)● FCP, Revision 12 (ANSI/INCITS 269-1996)● FCP-2, Revision 8 (ANSI/INCITS 350-2003)● FCP-3, Revision 4 (ANSI/INCITS 416-2006)● FCP-4, (BSR INCITS PN-1828-D-200x)● FC-SB-2, Revision 2.1 (ANSI/INCITS 349-2001)● FC-SB-3, Revision 1.6 (ANSI/INCITS 374-2003)● FC-VI, Revision 1.84 (ANSI/INCITS 357-2002)● FC-FLA, Revision 2.7 (INCITS TR-20-1998)● FC-PLDA, Revision 2.1 (INCITS TR-19-1998)● FC-Tape, Revision 1.17 (INCITS TR-24-1999)● FC-MI, Revision 1.92 (INCITS TR-30-2002)● FC-MI-2, Revision 2.6 (INCITS TR-39-2005)● FC-SP, Revision 1.6 (ANSI/INCITS 426-2007)● FC-DA, Revision 3.1 (INCITS TR-36-2004)● SNPing (ANSI INCITS 443-2008)● MIB-FA (INCITS/TR-32:2003 (R2008))● FAIS Revision 1● Extensive IETF-standards-based TCP/IP, SNMPv3, and Remote Monitoring (RMON) MIBs● Class of service: Classes 2, 3, and F● Fibre Channel standard port types: E, F, and FL● Fibre Channel enhanced port types: SD, and TEFabric services● Name server● Registered state change notification (RSCN)● Login services● Broadcast● In-order delivery● Name-server zoningAdvanced services● NPIV● VSANs● PortChannels● NPV mode● FlexAttach● F-port trunking and channeling● IVRDiagnostics and troubleshooting tools● POST diagnostics● Online diagnostics● Internal loopbacks● SPAN (remote SPAN not supported)● Fibre Channel traceroute● Fibre Channel ping● Fibre Channel debug● Cisco Fabric Analyzer● Syslog● Port-level statisticsManagement● Access methods◦ Out-of-band 10/100/1000 Ethernet port◦ EIA/TIA-232 serial console port◦ In-band management using IP over Fibre Channel● Access protocols◦ CLI◦ SNMP◦ SMI-S● Security◦ RBAC using RADIUS or TACACS+ authentication, authorization, and accounting (AAA) functions◦ VSAN-based roles◦ SSHv2◦ SNMPv3Management applications● Zero-Touch Installation deployment and provisioning with DHCP (scheduled for a future release of Cisco MDS 9000 NX-OS Software)● Cisco MDS 9000 Family CLI● Quick Configuration Wizard● Cisco Device Manager● Cisco DCNM for SAN Essentials Edition● Cisco DCNM for SAN Advanced Edition (optional software package)Availability● Nondisruptive In-Service Software Upgrade (ISSU)● Process monitoring and stateful process restart● Per-VSAN fabric services● Redundant, hot-swappable power supplies and redundant, hot-swappable power supply and fan trays● Hot-swappable SFP and SFP+ optics● PortChannels aggregating up to 16 ports with redundant load balancing● F-port channeling and trunking● Online diagnosticsServiceability● Configuration file management● Call Home● Port beaconing● System LEDs● SNMP traps for alertsEnvironmental● Physical dimensions (H x W x D) of 1RU: 1.72 x 17.16 x 18.89 in. (4.47 x 43.59 x 47.98 cm)● Weight of switch with dual power supplies: 22.2 lb (10 kg)● Ambient operating temperature: 32 to 104°F (0 to 40°C)● Ambient nonoperating temperature: -40 to 158°F (-40 to 70°C)● Humidity (RH), ambient (noncondensing) operating: 10 to 90%● Humidity (RH), ambient (noncondensing) nonoperating and storage: 5 to 95%● Operating altitude: -197 to 6500 ft (-60 to 2000m)Power and cooling● Power supplies (300W AC) (maximum of 2 per switch)◦ AC Input: 100 to 240 VAC nominal (+/-10% for full range)◦ Frequency: 50 to 60 Hz nominal (+/-3 Hz for full range)◦ Maximum power consumption:- With 4-Gbps optics (48 ports fully populated): 99W with 0.89A at 110 VAC and 0.45A at 220 VAC- With 8-Gbps optics (48 ports fully populated): 101W with 0.90A at 110 VAC and 0.46A at 220 VAC● Airflow: Rear to front (toward ports)Safety● UL 60950 -1● CAN/CSA-C22.2 No. 60950 -1● EN 60950 -1● IEC 60950 -1● AS/NZS 60950● IEC 60825● EN 60825● 21 CFR 1040EMC● FCC Part 15 (CFR 47) Class A● ICES-003 Class A● EN55022 Class A● CISPR22 Class A● AS/NZS CISPR22 Class A● VCCI Class A● EN55024● KN24● EN50082-1● EN61000-3-2● EN61000-3-3● EN61000-6-1● CISPR24● NEBS● GR-63-Core NEBS Level 3● GR-1089-Core NEBS Level 3● ETSI● ETS 300 019 Storage Class 1.1● ETS 300 019 Transportation Class 2.3● ETSI 300 019 Stationary Use Class 3.1